Description

Marantz RX7001 RF Extender

Infrared (IR) remote controls do not work properly when obstacles between the remote control and the audio/video devices disturb the operating signal. This problem can be solved using radio frequency (RF) as a carrier for IR commands.

The RF Extender consists of two units: a Receiver unit, and a Blaster unit. The Receiver unit receives RF signals sent out by the Marantz touch screen remote controls. This unit is connected to the Blaster unit, which converts the signals into IR signals. The Blaster unit then transmits the IR signals to the audio/video devices.

This product is compatible with the Marantz RC5200, RC5400 RC9200 and the RC9500 touchscreen remote controls.

SPECIFICATIONS:

HARDWARE BLASTER UNIT: Red LED (continuously on when powered, blinking during IR emission), 16 IDs and 4 CHs, 4 outputs for IR emitters, Input for Receiver unit, Possibility of having multiple RF extenders in one home not interfering, Positioning: freestanding, mounted horizontally or hanging up side down
HARDWARE RECIEVER UNIT: Red LED (blinking when receiving RF commands and RF interference), Output for Blaster unit, RF antenna
OPERATING TEMP: 32°F to 122°F (0°C to 50°C)
INFRARED (IR): Operating distance: 16.4 ft – 22.9 ft (5-7 meters), IR frequency range: DC/flash codes, 25kHz-100kHz
RADIO FREQUENCY: Operating distance: 147.6 ft (45 m) outdoor
Dual IR Emitters: Number of IR emitters : up to 8 (4×2), emitters wired in series, 3.5 mm mono mini-plug, Cable length: 10 ft (2.5 meters)Min. range: 3 ft (75 cm)
POWER ADAPTER: 230V / 50 Hz AC Power adapter (400mA/12V DC adapter, CE-approved)
ACCESSORIES: Connection cable (standard shielded stereo audio cable, 2.5 mm male jacks on both sides, up to20 ft / 6 m) Dual IR emitters, Power adapter, Mounting kit (plate and screws)